How to maintain flat car sewing machine
1. Clean the machine before operation, wipe off the dirt, then lubricate it with a few drops of oil, and let the machine idle for 2~3 minutes before sewing.
2. Pay attention to check the oil pan during the use of the machine to keep the lubricating oil in the oil pan clean and not blackened or deteriorated. The oil pan also needs to be cleaned regularly, because other sundries are easy to get into the oil pan during the use of the machine.
3. The amount of sewing machine oil should not be lower than the minimum mark line, nor higher than the high mark line. This needs to be checked at any time. If there is no oil supply to the machine from the oil window when the machine is running, it will cause the machine to be worn and the service life will be reduced.
4. Clean up the cloth scraps, dust, and garbage around the rotary hook after each machine operation. The needle plate, teeth, and brackets also need to be cleaned regularly.
5. After the flat car sewing machine has been used for a long time, it is necessary to check the machine comprehensively to see if there is any looseness in the machine, and then apply lubricating oil to various parts, such as the center hole of the pressure adjusting screw, the upper and lower ends of the needle bar, the small The contact between the connecting rod and the connecting shaft of the needle bar of the thread take-up cam, etc.
.Professional automatic sewing machine manufacturer in China, with years of manufacturing and export experience, contact us!1. Automatic head turning: After completing a quilting operation, the seam head can be turned up automatically, which is convenient for the replacement of quilted products.
2. Wire break detection: When the wire is broken, it will automatically stop, the red light of the wire break detection device will be on, and it can go back to the broken wire for quilting.
3. Step quilting: Various step quilting operations can be performed
4. Emergency stop protection: press the red emergency stop button at any time during work, the quilting machine will immediately power off and stop
5. Process setting: It has the settings of various practical process parameters such as stitch selection, angle correction, pattern scaling, etc. High-speed and accurate quilting at 2000 rpm, low noise, long machine life, and quilting that meets customer needs. The target quilting area of high-quality and high-yield quilted products is equal to the size of the machine, and the smallest machine installation area is achieved. ) drives the machine head to run in the X direction, and the servo motor (optional) drives the machine head to run in the Y direction, and the embroidery frame is fixed, which ensures the minimum machine transmission distance and stable long-term work. Fast and accurate, and avoids damage and replacement of the handpiece in the future.
《Needle zero position》 Set the machine origin, after the zero reset is completed, start the pull rod to make the machine head pass the needle zero position probe and then stop, move the machine head to the left side of the needle bed by hand, and align the left outer side of the machine head with the first position of the needle bed. At the needle, press the F1 key to write the currently displayed needle value. (First, enter the number of needles in one inch of the flat knitting machine and the total number of needles in the flat knitting machine, and then set the synchronous belt pitch correction parameters)
Whatsapp: +86-15024142684
Email: daisy@dgquick.cn
Contact person: Daisy
Address: Building 3 on the ninth floor, New Silicon Valley Songhu Industrial Park, No 29th Baobai Road ,Dongkeng Town, Dongguan City, Guangdong Province, China