How to solve the fuzzy stitches of automatic sewing machines
The upper thread may be blurred when the automatic sewing machine is sewing. If this happens, we need to check several places first, such as the sewing thread, thread clamp, thread passer, machine needle, etc. If there are problems in these places, it will lead to this situation.
Sewing machine: Sewing threads can be divided into thick and thin, as well as good or bad. We can choose better sewing threads, so that the embroidered stitches will be beautiful.
Thread clamp: The contents of the thread clamp should be cleaned up. If there are other items that cause the thread clamp to operate abnormally, the stitches will also be blurred.
Wire guide: Check whether the installation position of the wire guide is accurate, and whether the wire hole is smooth. If it is not smooth, grind or polish the wire hole to make it smooth.
Machine needle: Check the installation of the machine needle, check whether the machine needle is bent, etc. If the machine needle is bent, you need to change a machine needle.
If there is no problem after checking these places, you need to find a professional to repair it.
.Professional automatic sewing machine manufacturer in China, with years of manufacturing and export experience, contact us!《Needle zero position》 Set the machine origin, after the zero reset is completed, start the pull rod to make the machine head pass the needle zero position probe and then stop, move the machine head to the left side of the needle bed by hand, and align the left outer side of the machine head with the first position of the needle bed. At the needle, press the F1 key to write the currently displayed needle value. (First, enter the number of needles in one inch of the flat knitting machine and the total number of needles in the flat knitting machine, and then set the synchronous belt pitch correction parameters)
1. Automatic head turning: After completing a quilting operation, the seam head can be turned up automatically, which is convenient for the replacement of quilted products.
2. Wire break detection: When the wire is broken, it will automatically stop, the red light of the wire break detection device will be on, and it can go back to the broken wire for quilting.
3. Step quilting: Various step quilting operations can be performed
4. Emergency stop protection: press the red emergency stop button at any time during work, the quilting machine will immediately power off and stop
5. Process setting: It has the settings of various practical process parameters such as stitch selection, angle correction, pattern scaling, etc. High-speed and accurate quilting at 2000 rpm, low noise, long machine life, and quilting that meets customer needs. The target quilting area of high-quality and high-yield quilted products is equal to the size of the machine, and the smallest machine installation area is achieved. ) drives the machine head to run in the X direction, and the servo motor (optional) drives the machine head to run in the Y direction, and the embroidery frame is fixed, which ensures the minimum machine transmission distance and stable long-term work. Fast and accurate, and avoids damage and replacement of the handpiece in the future.
Whatsapp: +86-15024142684
Email: daisy@dgquick.cn
Contact person: Daisy
Address: Building 3 on the ninth floor, New Silicon Valley Songhu Industrial Park, No 29th Baobai Road ,Dongkeng Town, Dongguan City, Guangdong Province, China