New Automatic Sewing Machine
Introduction: This is a new type of automatic sewing machine with a USB memory disk, which can store up to 999 patterns, and each pattern can store 20,000 stitches. 2 times large-capacity full rotary hook, reducing frequent replacement of the bottom thread. It adopts a frame-type conjoined built-in dual-axis design, and the thread is loosened pneumatically.
Reinforced aircraft frame, widened guide rail, precise upper and lower shaft transmission design, precise design of toothed belt, and tensioner pulley without adjustment. After the improvement of pneumatic thread loosening, the whole machine has low noise, small vibration, smooth and stable operation, and more beautiful stitches. E type and G type are optional (optional electric control system: Dahao integrated/split; Shangyi integrated/split).
Advantages: Built-in conjoined twin shafts, more stable feeding and low noise. The main shaft drives the upper pulley, the main shaft is driven, and the tensioner is removed, so the transmission design is more reasonable. Can turn 90 degrees at right angles, draw circles, etc.
Pneumatic thread loosening, 100% thread loosening rate. The new aircraft frame has less vibration, no needle slip, and precise and beautiful lines.
Application case: suitable for cloth bags, toys, bags, leather factories, etc.
Show details:
Pneumatic presser foot lifting device, adjustable stitch height, remove limit block, reduce noise.
Widened guide rail: 12MM widened guide rail, good stability and more accurate feeding.
Two shafts in one body: the central drive design with balanced belt in the Y direction, the improved performance and service life of the whole machine are greatly improved
Thread winder: It adopts a new type of sewing thread winding, which replaces the disadvantages of the traditional belt winding, which is inconvenient and the winding bottom thread is disordered. It has a beautiful and practical appearance.
.
1. Automatic head turning: After completing a quilting operation, the seam head can be turned up automatically, which is convenient for the replacement of quilted products.
2. Wire break detection: When the wire is broken, it will automatically stop, the red light of the wire break detection device will be on, and it can go back to the broken wire for quilting.
3. Step quilting: Various step quilting operations can be performed
4. Emergency stop protection: press the red emergency stop button at any time during work, the quilting machine will immediately power off and stop
5. Process setting: It has the settings of various practical process parameters such as stitch selection, angle correction, pattern scaling, etc. High-speed and accurate quilting at 2000 rpm, low noise, long machine life, and quilting that meets customer needs. The target quilting area of high-quality and high-yield quilted products is equal to the size of the machine, and the smallest machine installation area is achieved. ) drives the machine head to run in the X direction, and the servo motor (optional) drives the machine head to run in the Y direction, and the embroidery frame is fixed, which ensures the minimum machine transmission distance and stable long-term work. Fast and accurate, and avoids damage and replacement of the handpiece in the future.
《Needle zero position》 Set the machine origin, after the zero reset is completed, start the pull rod to make the machine head pass the needle zero position probe and then stop, move the machine head to the left side of the needle bed by hand, and align the left outer side of the machine head with the first position of the needle bed. At the needle, press the F1 key to write the currently displayed needle value. (First, enter the number of needles in one inch of the flat knitting machine and the total number of needles in the flat knitting machine, and then set the synchronous belt pitch correction parameters)
Whatsapp: +86-15024142684
Email: daisy@dgquick.cn
Contact person: Daisy
Address: Building 3 on the ninth floor, New Silicon Valley Songhu Industrial Park, No 29th Baobai Road ,Dongkeng Town, Dongguan City, Guangdong Province, China