What are the steps for threading a flat car sewing machine?

Automatic Over Lock Cover Stitch Machine QK380.This product has found applications in many other industries.

The operation method of the panel of the fully automatic computerized knitting machine is more complicated, and the specific system parameters for the operation are set as follows:
《Needle zero position》 Set the machine origin, after the zero reset is completed, start the pull rod to make the machine head pass the needle zero position probe and then stop, move the machine head to the left side of the needle bed by hand, and align the left outer side of the machine head with the first position of the needle bed. At the needle, press the F1 key to write the currently displayed needle value. (First, enter the number of needles in one inch of the flat knitting machine and the total number of needles in the flat knitting machine, and then set the synchronous belt pitch correction parameters)

Main features of KUIKE single needle quilting machine
1. Automatic head turning: After completing a quilting operation, the seam head can be turned up automatically, which is convenient for the replacement of quilted products.
2. Wire break detection: When the wire is broken, it will automatically stop, the red light of the wire break detection device will be on, and it can go back to the broken wire for quilting.
3. Step quilting: Various step quilting operations can be performed
4. Emergency stop protection: press the red emergency stop button at any time during work, the quilting machine will immediately power off and stop
5. Process setting: It has the settings of various practical process parameters such as stitch selection, angle correction, pattern scaling, etc. High-speed and accurate quilting at 2000 rpm, low noise, long machine life, and quilting that meets customer needs. The target quilting area of high-quality and high-yield quilted products is equal to the size of the machine, and the smallest machine installation area is achieved. ) drives the machine head to run in the X direction, and the servo motor (optional) drives the machine head to run in the Y direction, and the embroidery frame is fixed, which ensures the minimum machine transmission distance and stable long-term work. Fast and accurate, and avoids damage and replacement of the handpiece in the future.

made of electronic components which need to be packaged together to offer long-lasting efficient light sources to the end user.

The computerized shuttle quilting multi-needle machine and the automatic opening machine are developed according to certain technologies and are born in accordance with the needs of the times. Combining production technology and advanced production level, the long-arm computerized quilting machine adopts a unique upper and lower hanging head design. The solution of shuttle quilting multi-needle machine uses industrial-grade computer to process and transmit the data of the quilting machine, which greatly improves the mechanical working mode of the traditional special frequency converter, and has a strong fault-tolerant function.

To ensure the overall quality of , every part is exquisitely crafted to meet the industry quality standards required. For example, this product is manufactured in the premise of doing harm to the office staff or other potential users.